Nokia
From Droam Prepaid SIM Encyclopedia
Nokia N8
1 - Press the "Settings" button.
2 - Press the "connection" button.
3 - In this menu, you need to enable the "Data Roaming" option.
4 - Then press the "destination" button.
5 - Choose "New Access Point" from the menu.
6 - If asked to check for available access points, press "no".
7 - In the next menu that opens, press the "Packet Data" option.
8 - Enter a name (APNChangeR for example) and press "OK".
9 - Select the APN group you just made and press the "Options" button on your phone
10 - Choose the "Edit" option
11 - Go to the "Access Point Name" and press the option button on your phone.
12 - Choose the "Edit" option.
13 - Enter the address provided by your carrier: abc.abcd.abc in the text field and press "OK".
14 - After you are done, go to your browser and press the "Options" button.
Press on "Settings" and then on "General".
Check that the Access point in use is the one you defined, if not, press on the access point and choose "User defined" and select the APN you defined.
15 - Done!
Nokia E72
1 - In the menu choose "ctrl. panel".
2 - Press the "settings" button.
3 - Press the "connection" button.
4 - Press the "destination" button.
5 - Press the "Internet" button.
6 - In this screen, press the "options" button on your phone.
7 - Choose "New Access Point" from the menu.
8 - If asked to check for available access points, press "no".
9 - In the next menu that opens, press the "Packet Data" option.
10 - Enter a name (APNChangeR for example) and press "OK".
11 - Select the APN group you just made and press the "Options" button on your phone.
12 - Choose the "Edit" option.
13 - Go to the "Access Point Name" and press the option button on your phone.
14 - Choose the "Edit" option.
15 - Enter : abc.abcd.abc in the text field and press "OK". Done!
Nokia 5800
1 - Go to the menu and choose "Settings".
2 - Then choose "Connectivity".
3 - Choose "Destinations".
4 - Choose "Access Point".
5 - Answer "No" to the question: "Automatically check for available access points?".
6 - Choose "Packet Data".
7 - Type APNChangeR (for example).
8 - In the “Select destination” menu, choose “Internet”.
9 - Now, choose “Internet”.
10 - Choose the Access Point you’ve just created: "APNChangeR" (for example).
11 - Connection name: APNChangeR (for example) Data bearer: Packet data Access point name: abc.abcd.abc (per your carrier's instructions) Prompt password: No Authentication: Normal
12 - Use access point : "Automatically". Done!